Fencing systems are an important part of outdoor spaces, providing protection, privacy and an aesthetic appearance.
One of the latest and most innovative solutions on the market is the half-frame Woodlook fencing system, which features quick and easy installation, virtually maintenance-free performance, long service life and exceptional resistance to adverse weather conditions.
One of the greatest advantages of the Half Frame Woodlook fencing system is its quick and easy installation. The system is designed to allow effortless installation without the need for special tools or professional skills. This simple installation system ensures that the fence can be installed in a relatively short time and with minimal effort.
Another benefit of the Half Frame Woodlook fencing system is its virtually maintenance-free nature. The material is made of high-quality WPC, which resists rot, rust, mould and other types of damage, meaning that regular painting or surface treatments are not required to keep it in good condition. Simply rinse the system with soap and water, and you can enjoy its beautiful appearance for years without worrying about maintenance.
The Woodlook Half Frame fencing system also stands out for its long service life. The material is UV-resistant, which prevents fading and damage to the colour and surface of the system. In addition, the system is 100% frost-resistant, meaning it will not show cracks or deformations at low temperatures, which is often a problem with other types of fencing systems.
Read the complete installation guide, which consists of 4 steps:
Step number 1. Pre-drill holes into the side U-profile (SUP) using a 6mm drill bit. (It is necessary to use at least 2 of the supplied screws for the side U-profiles – at the start and end of the side U-profile, approx. 50mm from the ends of the profiles).
Next, place the side U-profile (SUP) against the vertical side of the wall and align it using a spirit level. Mark the fixing points for the side U-profile (SUP) on the wall. At the marked points, drill 100mm deep holes using an 8mm drill bit. Then insert the supplied 8*100mm frame fixings into the drilled holes. Position the side U-profile (SUP) and screw it in with the corresponding screw (see photo).
Step number 2. Insert the first Woodlook fence profile into the prepared side U-profiles (SUP), propping it up at the required height. Then pre-drill holes in both side U-profiles (SUP) using a 3mm drill bit so that they pass through the fence
profile Woodlook. The hole depth will be max. 19mm (do not drill right through the entire structure). Next, screw the supplied 4.2*19mm screws into the pre-drilled holes. After screwing both sides, remove the temporary support under the fence profile.
Step number 3. Continue by inserting the required number of Woodlook fence profiles (see photo).
Step number 4. On both side U-profiles (SUP), pre-drill holes using a 3mm drill bit so that they pass through the final Woodlook fence profile. The hole depth will be max. 19mm (do not drill right through the entire structure). Next, screw the supplied 4.2*19mm screws into the pre-drilled holes.
If you have followed these steps, you have achieved the final appearance of the Woodlook fencing system.
